High Degree Of Polymerization Research Articles

Comparative transcriptomic and metabolomic profiles reveal fruit peel color variation in two red pomegranate cultivars.

Pomegranate (Punica granatum L.) which belongs to family Lythraceae, is one of the most important fruit crops of many tropical and subtropical regions. A high variability in fruit color is observed among different pomegranate accessions, which arises from the qualitative and quantitative differences in anthocyanins. However, the mechanism of fruit color variation is still not fully elucidated. In the present study, we investigated the red color mutation between a red-skinned pomegranate 'Hongbaoshi' and a purple-red-skinned cultivar 'Moshiliu', by using transcriptomic and metabolomic approaches. A total of 51 anthocyanins were identified from fruit peels, among which 3-glucoside and 3,5-diglucoside of cyanidin (Cy), delphinidin (Dp), and pelargonidin (Pg) were dominant. High proportion of Pg in early stages of 'Hongbaoshi' but high Dp in late stages of 'Moshiliu' were characterized. The unique high levels of Cy and Dp anthocyanins accumulating from early developmental stages accounted for the purple-red phenotype of 'Moshiliu'. Transcriptomic analysis revealed an early down-regulated and late up-regulated of anthocyanin-related structure genes in 'Moshiliu' compared with 'Hongbaoshi'. Alao, ANR was specially expressed in 'Hongbaoshi', with extremely low expression levels in 'Moshiliu'. For transcription factors R2R3-MYB, the profiles demonstrated a much higher transcription levels of three subgroup (SG) 5 MYBs and a sharp decrease in expression of SG6 MYB LOC116202527 in high-anthocyanin 'Moshiliu'. SG4 MYBs exhibited two entirely different patterns, LOC116203744 and LOC116212505 were down-regulated whereas LOC116205515 and LOC116212778 were up-regulated in 'Moshiliu' pomegranate. The results indicate that specific SG members of the MYB family might promote the peel coloration in different manners and play important roles in color mutation in pomegranate.

Modified fructan accumulation through overexpression of wheat fructan biosynthesis pathway fusion genes Ta1SST:Ta6SFT

BackgroundFructans are water-soluble carbohydrates that accumulate in wheat and are thought to contribute to a pool of stored carbon reserves used in grain filling and tolerance to abiotic stress.ResultsIn this study, transgenic wheat plants were engineered to overexpress a fusion of two fructan biosynthesis pathway genes, wheat sucrose: sucrose 1-fructosyltransferase (Ta1SST) and wheat sucrose: fructan 6-fructosyltransferase (Ta6SFT), regulated by a wheat ribulose-1,5-bisphosphate carboxylase/oxygenase small subunit (TaRbcS) gene promoter. We have shown that T4 generation transgene-homozygous single-copy events accumulated more fructan polymers in leaf, stem and grain when compared in the same tissues from transgene null lines. Under water-deficit (WD) conditions, transgenic wheat plants showed an increased accumulation of fructan polymers with a high degree of polymerisation (DP) when compared to non-transgenic plants. In wheat grain of a transgenic event, increased deposition of particular fructan polymers such as, DP4 was observed.ConclusionsThis study demonstrated that the tissue-regulated expression of a gene fusion between Ta1SST and Ta6SFT resulted in modified fructan accumulation in transgenic wheat plants and was influenced by water-deficit stress conditions.

χ(2) and χ(3) enhancement by arylamine substituents in aromatic conjugated polyenyne polymers

In this work, we have determined the χ(1), χ(2), and χ(3) NLO properties of NH2substituted aromatic polyenynes in ortho, meta, and para positions. It is worth noting that Mednis-Genkin’s approximation takes into account the intraband contribution with a derivate of the dipole valence-conduction band moment transition, unlike, for example, Ward’s summation-over-sates (SOS) methodology, which considers the difference of these states. Indeed, we have selected these polymers because of the high asymmetry in their molecular wavefunction. In this way, the calculated χ(3) values of the para-NH2 substituted aromatic polyenyne with a higher degree of polymerization are near 1 X 10−7 esu. For its part, the ortho polymer has higher values, of the order of 1 X 10−6 esu, due to its high transition dipole moment. We have also found that the energy band distribution in the para position of these polymers produces van Hove points, which have a negligible proportion of the NLO properties, compared with singularity regions 1 and 2, which have a contribution of 100 %. These regions are due to the wavefunction coefficients’ first and second-order derivatives. Besides, without considering border effects nor correlation effects, and only the variation of excitation energy, we have calculated that the quaternary monomeric oligomers of these polymers have almost similar values of χ(2) and χ(3). Then, it implies building a methodology to synthesize the polymers to avoid canceling the NLO-χ(2) and -χ(3) values.

Microscopic Understanding of Interfacial Performance and Antifoaming Mechanism of REP Type Block Polyether Nonionic Surfactants.

In many practical applications involving surfactants, achieving defoaming without affecting interfacial activity is a challenge. In this study, the antifoaming performance of REP-type block polymer nonionic surfactant C12EOmPOn was determined, and molecular dynamics simulation method was employed to investigate the molecular behaviors of surfactants at a gas/water interface, the detailed arrangement information of the different structural segments of the surfactant molecules and the inter-/intra-interactions between all the structural motifs in the interfacial layer were analyzed systematically, by which the antifoaming mechanisms of the surfactants were revealed. The results show that the EO and PO groups of REP-type polyether molecules are located in the aqueous phase near the interface, and the hydrophobic tails distribute separately, lying almost flat on the gas/water interface. The interaction between the same groups of EOs and POs is significantly stronger than with water. REP block polyethers with high polymerization degrees of EO and PO are more inclined to overlap into dense layers, resulting in the formation of aggregates resembling "oil lenses" spreading on the gas/water interface, which exerts a stronger antifoaming effect. This study provides a smart approach to obtaining efficient antifoaming performance at room temperature without adding other antifoam ingredients.

Enzymatic Synthesis of Copolyesters with the Heteroaromatic Diol 3,4-Bis(hydroxymethyl)furan and Isomeric Dimethyl Furandicarboxylate Substitutions.

Polyesters from furandicarboxylic acid derivatives, i.e., dimethyl 2,5-furandicarboxylate (2,5-DMFDCA) and 2,4-DMFDCA, show interesting properties among bio-based polymers. Another potential heteroaromatic monomer, 3,4-bis(hydroxymethyl)furan (3,4-BHMF), is often overlooked but holds promise for biopolymer synthesis. Cleaning and greening synthetic procedures, i.e., enzymatic polymerization, offer sustainable pathways. This study explores the Candida antarctica lipase B (CALB)-catalyzed copolymerization of 3,4-BHMF with furan dicarboxylate isomers and aliphatic diols. The furanic copolyesters (co-FPEs) with higher polymerization degrees are obtained using 2,4-isomer, indicating CALB's preference. Material analysis revealed semicrystalline properties in all synthesized 2,5-FDCA-based co-FPEs, with multiple melting temperatures (Tm) from 53 to 124 °C and a glass-transition temperature (Tg) of 9-10 °C. 2,4-FDCA-based co-FPEs showed multiple Tm from 43 to 61 °C and Tg of -14 to 12 °C; one of them was amorphous. In addition, all co-FPEs showed a two-step decomposition profile, indicating aliphatic and semiaromatic segments in the polymer chains.

Solidification/stabilization and optimization of municipal solid waste incineration fly ash with aluminosilicate solid wastes

Alkali-activation is an effective municipal solid waste incineration fly ash (MSWIFA) solidification/stabilization (S/S) technology. However, the characteristics of calcium-rich silica-poor aluminum phase in MSWIFA easily cause the structural instability and contamination of alkali activated MSWIFA S/S bodies. Therefore, the aluminosilicate solid wastes are used in this work to optimize the immobilization and structural properties. Results showed that incorporation of aluminosilicate solid wastes significantly improved the compressive strength and heavy metals pollution toxicity of MSWIFA S/S bodies. Compared to alkali activated MSWIFA, the compressive strength of S/S bodies with addition of coal fly ash, silica fume and granulated blast furnace slag improved by 31.0%, 47.6% and 50.8% when the curing time was 28 days, respectively. Leachability of Pb, Zn and Cd in these alkali activated MSWIFA S/S bodies was far below the threshold value specified in Standard GB16889. Aluminosilicate solid wastes provided abundant Si/Al structural units, and some new phases such as ettringite(AFt, 3CaO⋅Al2O3⋅3CaSO4⋅32H2O), calcium sulfoaluminate hydrate (3CaO⋅Al2O3⋅CaSO4⋅12H2O) and Friedel's salt (CaO⋅Al2O3⋅CaCl2⋅10H2O) can be detected in S/S matrix with aluminosilicate solid wastes, along comes increased the amount of the amorphous phases. Lower Ca/Si molar ratio tended to form the network structure gel similar to tobermorite with higher polymerization degree. Meanwhile, the silica tetrahedron of the gels changed from the oligomerization state like island to the hyperomerization state like chain, layer network or three-dimensional structure, and average molecular chain length increased. These findings provide theoretical basis for structural properties optimization and resource utilization of MSWIFA S/S matrices.

The impact of environmental humidity on the mechanical property and microstructure of magnesium silicate hydrate cement

Environmental factors have a significant impact on the performance of cement-based materials. As a new type of low-carbon cementitious material, the performance of magnesium silicate hydrate cement (MSHC) under different environmental humidity conditions is crucial for its application. This study aimed to investigate the effects of environmental humidity on the hardening properties of MSHC. Compressive strength tests of MSHC were conducted under four different relative humidity (RH) conditions (RH of 33%, 58%, 75%, and 97%) and water curing (RH-w) condition. Microanalysis techniques were employed to reveal the strength mechanisms of MSHC under different environmental humidity conditions. The results showed that MSHC exhibited the optimal mechanical performance when RH was 75%, reaching 42.29 MPa. When RH was 58%, the compressive strength of MSHC was close to the optimal level, which was 41.02 MPa. However, under other humidity conditions (RH33, RH97, and RH-w), the compressive strength of MSHC was much lower than the optimal level, decreasing by 30.93%, 41.90%, and 63.66%, respectively. Pore structure analysis showed that the volume of detrimental pores (>100 nm) in the sample was the lowest when RH was 75%. Compared with RH75, the volume of detrimental pores in RH33, RH58, RH97, and RH-w increased by 20.47%, 9.83%, 36.77%, and 156.92%, respectively. In addition, the variation of environmental humidity resulted in different polymerization levels in the M-S-H gel, and higher degrees of polymerization were observed when RH was 58% and 75%.

Modification of ramie fibre with a mixture of NaOH solution and iso-propanol solvent for enhancing its dyeing performance

Deep shade dyeing of ramie fibre is challenging due to its high degree of polymerisation, orientation, and crystallinity. The present work involved pre-treating ramie fibre with a solution containing a mixture of NaOH and alcohol in order to improve its dyeing ability. Based on the first screening results, it has been shown that iso-propanol is the optimal alcohol solvent for modifying ramie fibres with a mixture of NaOH solution, resulting in greater levels of dye exhaustion (E%), dye fixation rate (F%), total dye fixation efficiency (T%), and K/S values. Subsequently, the orthogonal array experimental technique (L16) was utilised to optimise the treatment conditions, and it was determined at a temperature of 25 °C, using a NaOH solution with a concentration of 140 g/L, a liquid ratio of 1:2 for the volume ratio of NaOH solution to iso-propanol solvent, and a treating period of 3 min. The treated samples were subjected to a range of analytical techniques, including XRD, FTIR, TGA, and SEM; these analyses conclusively verified that the samples' properties were altered due to the optimal combination treatment. The combination solution-treated samples had significantly higher barium values compared to the other samples, suggesting an ideal mercerisation treatment. The colourfastness to washing values exhibited satisfactory results for the treated samples. Besides, a handle assessment of raw ramie fabric and treated ramie fabric was conducted to enhance the practical application feasibility.

Acetylation of cotton knitted fabrics for improved quick drying after water absorption

Quick drying after water or sweat absorption is an important function of underwear. In this study, the hydroxy groups of cotton knitted fabrics (CFs) were partially acetylated, maintaining the original fabric structure. The following three heterogeneous acetylation processes were used: Ac-I (Ac2O/H2SO4/toluene), Ac-II (Ac2O/H2SO4/AcOH/water), and Ac-III (Ac2O/AcONa) systems (Ac2O, acetic anhydride; AcOH, acetic acid; AcONa, sodium acetate). Acetylated cotton knitted fabrics (AcCFs) with degree of substitution (DS) ≤ 0.5 and yields of > 80% were prepared. AcCFs prepared with the Ac-III system gave high degree of polymerization (DP) values of > 1500, whereas those prepared with the Ac-II system exhibited low DP values of ≤ 400. The moisture contents of AcCFs at 20 °C and 65% relative humidity decreased from 7.1 to 4.7% with increasing DS value up to 0.46; introducing hydrophobic acetyl groups into the CFs decreased their hydrophilic nature. Quick drying similar to that of a polyester fabric was achieved for some of the AcCFs with DS values of < 0.2. When the acetyl groups in the AcCFs were homogeneously distributed across each fiber width (achieved for AcCFs prepared with the Ac-II system), quick drying was evident in the AcCFs. The crystallinities and crystal widths of cellulose I for the AcCFs with DS values of ≤ 0.28 were almost unchanged compared with those of the original CFs. However, neither the crystallinities nor crystal widths of cellulose I were directly related to quick drying after water absorption. Thermal degradation of the AcCFs varied between the acetylation systems, and depended on the DP values and/or the presence of sulfate ester groups in the AcCFs.Graphical

An applicability study on various methods for determining the monomer conversion rate of polyamide 6

AbstractAnionic ring opening polymerization of ε‐caprolactam (CL) results in the formation of high molecular weight polyamide 6 (PA6) within a few minutes. The monomer conversion rate is an important characterization parameter for polymerization process as well as the end products. This paper used PA6 films with different polymerization degrees as research object for the first time, and systematically compared the performance of four methods for measuring CL conversion rate. The analytical methods were solvent extraction (methanol, ethanol, or water), vacuum removal, thermogravimetric analysis (TGA), and absorbance ratio respectively. For all PA6 products, solvent extraction based on methanol/water and vacuum removal were effective methods for determine their conversion rates. And TGA was only applicable for samples with high degree of polymerization. The CL conversion rate obtained by solvent extraction based on ethanol and absorbance ratio was slightly higher than the real value, especially the latter. Moreover, a new method was discovered and validated during the research process, namely atmospheric devolatilization. The methodology and results in this study can be employed for guiding the production and application of polymers, especially the reactive processing of PA6.

Evaluation of biological activity and prebiotic properties of proanthocyanidins with different degrees of polymerization through simulated digestion and in vitro fermentation by human fecal microbiota

The bioactive activity of proanthocyanidins (PAs) is closely associated with their degree of polymerization (DP), however, the effects of PAs with different DP on digestion and gut microbiota have remained unclear. To investigate this, we conducted in vitro simulated digestion and colonic fermentation studies on samples of PAs with different DP. The results showed that PAs was influenced by both protein precipitation and enzymolysis, resulting in a decrease in functional activity. PAs with a high DP were more sensitive to the gastrointestinal environment. The significant clustering trend in colonic fermentation verified the reliability of multivariate statistical techniques for screening samples with distinct functional differences. The gut microbiota analysis showed that oligomeric PAs had a stronger promoting effect on beneficial bacteria, while high polymeric PAs had a greater inhibitory effect on harmful bacteria. This study offers new insights into the biological activity and microbiological mechanisms of PAs with different DP.

Effect of Salts on Laccase-Catalyzed Polymerization of Lignosulfonate.

Enzymatic polymerization of lignosulfonate (LS) has a high potential for various applications. Here, the effect of different ions in low concentrations on enzymatic polymerization of LS was investigated, including salt solutions consisting of mono- and dicarboxylic acids, sulfate, phosphate and chloride with sodium as counter ion. LS polymerization was followed by viscometry and size exclusion (SEC) chromatography. Interestingly, there was only a small effect of ions on the activity of the laccase on standard substrate ABTS, while the effect on polymerization of LS was substantially different. The presence of acetate led to a 39% higher degree of polymerization (DP) for LS. Small angle X-ray scattering (SAXS) revealed that the structure of the enzyme was largely unaffected by the ions, while the determination of the zeta potential showed that those ions conveying higher negative surface charges onto LS particles showed lower DPs, than those not affecting the surface charge. Further, electron paramagnetic resonance (EPR) spectroscopy showed 5-times higher intensity in phenoxyl radicals for the monovalent ions compared to the divalent ones. It was concluded that the DPs of LS could be tuned in the presence of certain ions, by facilitating the interaction between the laccase substrate-binding site and the LS molecules.

Enhancing the endo-activity of the thermophilic chitinase to yield chitooligosaccharides with high degrees of polymerization

Thermophilic endo-chitinases are essential for production of highly polymerized chitooligosaccharides, which are advantageous for plant immunity, animal nutrition and health. However, thermophilic endo-chitinases are scarce and the transformation from exo- to endo-activity of chitinases is still a challenging problem. In this study, to enhance the endo-activity of the thermophilic chitinase Chi304, we proposed two approaches for rational design based on comprehensive structural and evolutionary analyses. Four effective single-point mutants were identified among 28 designed mutations. The ratio of (GlcNAc)3 to (GlcNAc)2 quantity (DP3/2) in the hydrolysates of the four single-point mutants undertaking colloidal chitin degradation were 1.89, 1.65, 1.24, and 1.38 times that of Chi304, respectively. When combining to double-point mutants, the DP3/2 proportions produced by F79A/W140R, F79A/M264L, F79A/W272R, and M264L/W272R were 2.06, 1.67, 1.82, and 1.86 times that of Chi304 and all four double-point mutants exhibited enhanced endo-activity. When applied to produce chitooligosaccharides (DP ≥ 3), F79A/W140R accumulated the most (GlcNAc)4, while M264L/W272R was the best to produce (GlcNAc)3, which was 2.28 times that of Chi304. The two mutants had exposed shallower substrate-binding pockets and stronger binding abilities to shape the substrate. Overall, this research offers a practical approach to altering the cutting pattern of a chitinase to generate functional chitooligosaccharides.Graphical abstract

Energy-storage performance of NaNbO3-based ceramic capacitor derived from a high DOP glass network structure

0.75(0.4Na2O-0.1K2O-0.5Nb2O5)-0.25(0.87SiO2-0.13BaO) glass-ceramics were prepared by a traditional melting method to optimize the crystallization kinetics. We obtained a glass network with high degree of polymerization (DOP) by crystallization at different temperatures and achieved a high energy storage density. The increase of crystallization temperature has promoted the precipitation of ferroelectric phases Na0.9K0.1NbO3 and NaNbO3 with high dielectric constant (1200–2000), promoted the increases of grain size from 0.76 μm to 1.33 μm, and reduced the gap width from 3.71eV to 3.22eV. When the crystallization temperature increased to 1000°C–1100 °C, Ba2NaNb5O15 with low dielectric constant (∼460) increases, grain boundaries appear, and dielectric constant and BDS decrease. Among all the samples, the sample crystallized at 900 °C showed homogeneous and dense microstructure (grain size∼0.91 μm). The experimental data confirmed that the glass sample crystallized at 900 °C achieves low dielectric loss (<0.005) and high dielectric constant (∼122). The glass sample crystallized at 900 °C sample had a maximum energy storage density of 3.65 J/cm3, a power density of about 54 MW/cm3 and a super-fast discharge speed of 38 ns at 660 kV/cm.

Effects of particle properties, intermolecular forces, and molecular structure on the shear-thickening behavior of waxy starch dispersions

The shear-thickening phenomenon in waxy starch dispersions has been reported; however, the influence of starch properties on it remains unclear. Herein, the shear-thickening behavior of five waxy starch dispersions at different concentrations is investigated, and two shear-thickening areas are identified for the first time. Waxy potato and cassava starch dispersions present two shear-thickening areas, waxy maize and wheat starch dispersions exhibit one shear-thickening area, and waxy rice starch dispersion exhibits no shear-thickening behavior. Starches with high degree of polymerization (DP > 12 and > 37 chains), short-range order, relative crystallinity, melting enthalpy (ΔH), and low molecular weight easily form large particle fragments and strong intermolecular forces, thereby resulting in double shear-thickening areas. Starches with relatively high DP > 12 chains, short-range order, relative crystallinity, and ΔH form one shear-thickening area. Starches with no shear-thickening area have high molecular weight, degree of branching, and DP < 12 chains, and low short-range order, relative crystallinity, and ΔH. It can be speculated that the first shear-thickening area (2–5 s−1) is due to the presence of large particle fragments, whereas the second (10–15 s−1) is due to the interaction between the side chains of the starch molecule.

Low-Viscosity Route to High-Molecular-Weight Water-Soluble Polymers: Exploiting the Salt Sensitivity of Poly(N-acryloylmorpholine).

We report a new one-pot low-viscosity synthetic route to high molecular weight non-ionic water-soluble polymers based on polymerization-induced self-assembly (PISA). The RAFT aqueous dispersion polymerization of N-acryloylmorpholine (NAM) is conducted at 30 °C using a suitable redox initiator and a poly(2-hydroxyethyl acrylamide) (PHEAC) precursor in the presence of 0.60 M ammonium sulfate. This relatively low level of added electrolyte is sufficient to salt out the PNAM block, while steric stabilization is conferred by the relatively short salt-tolerant PHEAC block. A mean degree of polymerization (DP) of up to 6000 was targeted for the PNAM block, and high NAM conversions (>96%) were obtained in all cases. On dilution with deionized water, the as-synthesized sterically stabilized particles undergo dissociation to afford molecularly dissolved chains, as judged by dynamic light scattering and 1H NMR spectroscopy studies. DMF GPC analysis confirmed a high chain extension efficiency for the PHEAC precursor, but relatively broad molecular weight distributions were observed for the PHEAC-PNAM diblock copolymer chains (Mw/Mn > 1.9). This has been observed for many other PISA formulations when targeting high core-forming block DPs and is tentatively attributed to chain transfer to polymer, which is well known for polyacrylamide-based polymers. In fact, relatively high dispersities are actually desirable if such copolymers are to be used as viscosity modifiers because solution viscosity correlates closely with Mw. Static light scattering studies were also conducted, with a Zimm plot indicating an absolute Mw of approximately 2.5 × 106 g mol-1 when targeting a PNAM DP of 6000. Finally, it is emphasized that targeting such high DPs leads to a sulfur content for this latter formulation of just 23 ppm, which minimizes the cost, color, and malodor associated with the organosulfur RAFT agent.

High molecular/low acetylated chitosans reduce adhesion of Campylobacter jejuni to host cells by blocking JlpA

Infections caused by Campylobacter spp. are a major cause of severe enteritis worldwide. Multifactorial prevention strategies are necessary to reduce the prevalence of Campylobacter. In particular, antiadhesive strategies with specific inhibitors of early host–pathogen interaction are promising approaches to reduce the bacterial load. An in vitro flow cytometric adhesion assay was established to study the influence of carbohydrates on the adhesion of C. jejuni to Caco-2 cells. Chitosans with a high degree of polymerization and low degree of acetylation were identified as potent antiadhesive compounds, exerting significant reduction of C. jejuni adhesion to Caco-2 cells at non-toxic concentrations. Antiadhesive and also anti-invasive effects were verified by confocal laser scanning microscopy. For target identification, C. jejuni adhesins FlpA and JlpA were expressed in Escherichia coli ArcticExpress, and the influence of chitosan on binding to fibronectin and HSP90α, respectively, was investigated. While no effects on FlpA binding were found, a strong inhibition of JlpA-HSP90α binding was observed. To simulate real-life conditions, chicken meat was inoculated with C. jejuni, treated with antiadhesive chitosan, and the bacterial load was quantified. A strong reduction of C. jejuni load was observed. Atomic force microscopy revealed morphological changes of C. jejuni after 2 h of chitosan treatment, indicating disturbance of the cell wall and sacculi formation by electrostatic interaction of positively charged chitosan with the negatively charged cell surface. In conclusion, our data indicate promising antiadhesive and anti-invasive potential of high molecular weight, strongly de-acetylated chitosans for reducing C. jejuni load in livestock and food production.Key points• Antiadhesive effects of chitosan with high DP/low DA against C. jejuni to host cells• Specific targeting of JlpA/Hsp90α interaction by chitosan• Meat treatment with chitosan reduces C. jejuni load

A Long-Chain Dextran Produced by Weissella cibaria Boosts the Diversity of Health-Related Gut Microbes Ex Vivo.

Long-chain dextrans are α-glucans that can be produced by lactic acid bacteria. NextDextTM, a specific long-chain dextran with a high degree of polymerisation, produced using Weissella cibaria, was recently shown to exert prebiotic potential in vitro. In this study, the ex vivo SIFR® technology, recently validated to provide predictive insights into gut microbiome modulation down to the species level, was used to investigate the effects of this long-chain dextran on the gut microbiota of six human adults that altogether covered different enterotypes. A novel community modulation score (CMS) was introduced based on the strength of quantitative 16S rRNA gene sequencing and the highly controlled ex vivo conditions. This CMS overcomes the limitations of traditional α-diversity indices and its application in the current study revealed that dextran is a potent booster of microbial diversity compared to the reference prebiotic inulin (IN). Long-chain dextran not only exerted bifidogenic effects but also consistently promoted Bacteroides spp., Parabacteroides distasonis and butyrate-producing species like Faecalibacterium prausnitzii and Anaerobutyricum hallii. Further, long-chain dextran treatment resulted in lower gas production compared to IN, suggesting that long-chain dextran could be better tolerated. The additional increase in Bacteroides for dextran compared to IN is likely related to the higher propionate:acetate ratio, attributing potential to long-chain dextran for improving metabolic health and weight management. Moreover, the stimulation of butyrate by dextran suggests its potential for improving gut barrier function and inflammation. Overall, this study provides a novel tool for assessing gut microbial diversity ex vivo and positions long-chain dextran as a substrate that has unique microbial diversity enhancing properties.

A rumen-derived bifunctional glucanase/mannanase uncanonically releases oligosaccharides with a high degree of polymerization preferentially from branched substrates

Glycoside hydrolases (GHs) are known to depolymerize polysaccharides into oligo-/mono-saccharides, they are extensively used as additives for both animals feed and our food. Here we reported the characterization of IDSGH5-14(CD), a weakly-acidic mesophilic bifunctional mannanase/glucanase of GH5, originally isolated from sheep rumen microbes. Biochemical characterization studies revealed that IDSGH5-14(CD) exhibited preferential hydrolysis of mannan-like and glucan-like substrates. Interestingly, the enzyme exhibited significantly robust catalytic activity towards branched-substrates compared to linear polysaccharides (P < 0.05). Substrate hydrolysis pattern indicated that IDSGH5-14(CD) predominantly liberated oligosaccharides with a degree of polymerization (DP) of 3–7 as the end products, dramatically distinct from canonical endo-acting enzymes. Comparative modeling revealed that IDSGH5-14(CD) was mainly comprised of a (β/α)8-barrel-like structure with a spacious catalytic cleft on surface, facilitating the enzyme to target high-DP or branched oligosaccharides. Molecular dynamics (MD) simulations further suggested that the branched-ligand, 64-α-D-galactosyl-mannohexose, was steadily accommodated within the catalytic pocket via a two-sided clamp formed by the aromatic residues. This study first reports a bifunctional GH5 enzyme that predominantly generates high-DP oligosaccharides, preferentially from branched-substrates. This provides novel insights into the catalytic mechanism and molecular underpinnings of polysaccharide depolymerization, with potential implications for feed additive development and high-DP oligosaccharides preparation.

Enhanced bacterial cellulose production in Gluconacetobacter xylinus by overexpression of two genes (bscC and bcsD) and a modified static culture

Bacterial cellulose (BC), a nanostructured material, is renowned for its excellent properties. However, its production by bacteria is costly due to low medium utilization and conversion rates. To enhance the yield of BC, this study aimed to increase BC yield through genetic modification, specifically by overexpressing bcsC and bcsD in Gluconacetobacter xylinus, and by developing a modified culture method to reduce medium viscosity by adding water during fermentation. As a result, BC yields of 5.4, 6.2, and 6.8 g/L were achieved from strains overexpressing genes bcsC, bcsD, and bcsCD, significantly surpassing the yield of 2.2 g/L from wild-type (WT) strains. In the modified culture, the BC yields of all four strains increased by >1 g/L with the addition of 20 mL of water during fermentation. Upon comparing the properties of BC, minimal differences were observed between the WT and pbcsC strains, as well as between the static and modified cultures. In contrast, BC produced by strains overexpressing bcsD had a denser microstructural network and exhibited demonstrated higher tensile strength and elongation-to-break. Compared to WT, BC from bcsD overexpressed strains also displayed enhanced crystallinity, higher degree of polymerization and improved thermal stability.